 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP330 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP330 Programmable Controllers AC / DC-Input Module Telecommunication The TOSHIBA TLP330 consists of a photo-transistor optically coupled to two gallium arsenide infrared emitting diode connected inverse parallel in a six lead plastic DIP package.This is suitable for application of AC input current up to 150mA. * * * * * If maximum rating: 150mA Collector-Emitter voltage: 55V(min.) Current transfer ratio: 25% (min.)(IF = 20mA) Isolation voltage: 5000Vrms (min.) UL recognized: UL1577, file no. E67349 TOSHIBA Weight: 0.39 g 11-7A8 Unit in mm Pin Configurations (top view) 1 6 1: Anode, cathode 2: Cathode, anode 3: NC 4: Emitter 5: Collector 6: Base 2 5 3 4 1 2007-10-01 TLP330 Absolute Maximum Ratings (Ta = 25C) Characteristic Forward current LED Forward current derating (Ta 25C) Peak forward current (100s pulse,100pps) Junction temperature Collector-emitter voltage Collector-base voltage Emitter-collector voltage Detector Emitter-base voltage Collector current Power dissipation Power dissipation derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10s) Total package power dissipation Total package power dissipation derating (Ta25C) Isolation voltage (AC, 1 min, R.H. 60%) (Note 1) Symbol IF IF /C IFP Tj VCEO VCBO VECO VEBO IC PC PC /C Tj Tstg Topr Tsol PT PT /C BVS Rating 150 -1.5 1 125 55 80 7 7 80 150 -1.5 125 -55~125 -55~100 260 250 -2.5 5000 Unit mA mA /C A C V V V V mA mW mW /C C C C C mW mW /C Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device considered a two terminal device: Pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Collector current Operating temperature Symbol VCC IF(RMS) IC Topr Min. -25 Typ. 5 20 1 Max. 24 120 10 85 Unit V mA mA C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP330 Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Forward current Capacitance Collector-emitter breakdown voltage Emitter-collector breakdown voltage Collector-base breakdown voltage Detector Emitter-base breakdown voltage Collector dark current Collector dark current Collector dark current DC forward current gain Capacitance (collector to emitter) Symbol VF IF CT V(BR) CEO V(BR) ECO V(BR) CBO V(BR) EBO ICEO ICER ICBO hFE CCE Condition IF = 100 mA VF= 0.7V V = 0, f = 1 MHz IC = 0.5 mA IE = 0.1 mA IC = 0.1 mA IE = 0.1 mA VCE = 24 V VCE = 24 V, Ta = 85C VCE = 24 V, Ta = 85C RBE = 1M VCE = 10V VCE = 5 V, IC = 0.5mA V = 0, f = 1 MHz Min. -- -- -- 55 7 80 7 -- -- -- -- -- -- Typ. 1.4 2.5 100 -- -- -- -- 10 2 0.5 0.1 400 10 Max. 1.7 20 -- -- -- -- -- 100 50 10 -- -- -- Unit V A pF V V V V nA A A nA -- pF Coupled Electrical Characteristics (Ta = 25C) Characteristic Current transfer ratio Base photo-current Collector-emitter saturation voltage Off-state collector current CTR symmetry Symbol IC / IF IC / IF(high) IPB VCE (sat) IC(off) IC (ratio) Condition IF = 20 mA VCE = 1 V IF = 100 mA VCE = 1 V IF = 5 mA, VCB = 5 V IC = 2.4 mA, IF = 20 mA IC = 2.4 mA, IF = 100 mA VF = 0.7V, VCE = 24 V IC (IF = -20mA) / IC (IF = +20mA) MIn. 25 20 -- -- -- -- 0.5 Typ. -- -- 10 -- -- 1 1 Max. -- 80 -- 0.4 0.4 10 2 Unit % % A V A -- 3 2007-10-01 TLP330 Isolation Characteristics (Ta = 25C) Characteristic Capacitance (input to output) Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. -- 5x10 10 Typ. 0.8 10 14 Max. -- -- -- -- -- Unit pF Vrms Vrms Vdc 5000 -- -- -- 10000 10000 Switching Characteristics (Ta = 25C) Characteristic Rise time Fall time Turn-on time Turn-off time Turn-on time Storage time Turn-off time Turn-on time Storage time Turn-off time Symbol tr tf ton toff tON ts tOFF tON ts tOFF RL = 1.9 k (Fig.1) RBE = OPEN VCC = 5 V, IF = 16 mA RL = 1.9 k (Fig.1) RBE = 220k VCC = 5 V, IF = 16 mA VCC = 10 V IC = 2 mA RL = 100 Test Condition Min. -- -- -- -- -- -- -- -- -- -- Typ. 2 3 3 3 2 15 25 2 12 20 Max. -- -- -- -- -- -- -- -- -- -- s s s Unit Fig. 1 Switching time test circuit IF RL RBE VCC VCE IF tS VCE 4.5V 0.5V tOFF VCC tON 4 2007-10-01 TLP330 IF - Ta 200 200 PC - Ta Allowable forward current IF (mA) Allowable collector power Dissipation PC (mW) 0 20 40 60 80 100 120 160 160 120 120 80 80 40 40 0 -20 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width 100s Ta = 25C 100 50 30 1000 500 300 Ta = 25C IF - V F Pulse forward current IFP (mA) (mA) Forward current IF 10-3 10-2 10-1 100 10 5 3 100 50 30 1 0.5 0.3 0.1 0.6 10 3 3 3 3 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF/Ta - IF -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1000 500 300 IFP - VFP Pulse forward current IFP (mA) Forward voltage temperature Coefficient VF/Ta (mV / C) 100 50 30 10 5 3 0 0.6 Pulse width 10s repetitive frequency = 100Hz Ta = 25C 0.3 0.5 1 3 5 10 30 50 1.0 1.4 1.8 2.2 2.6 Forward current IF (mA) Pulse forward voltage VFP (V) 5 2007-10-01 TLP330 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01 |
Price & Availability of TLP33007
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |